FIAT FULL IMMO BYPASS 2020 DEVICE

FIAT FULL IMMO BYPASS 2020 DEVICE

$1,099.00

FIAT FULL IMMO BYPASS 2020—plug-and-play immobilizer bypass for Fiat, Alfa, Lancia & Iveco (2007–2017). Start the engine in seconds. No PC, no key programming.

- +

BUY FIAT FULL IMMO BYPASS 2020 DEVICE

FIAT FULL IMMO BYPASS 2020 — Instant Immo Bypass Tool (No PC Required)

The FIAT FULL IMMO BYPASS 2020 from Auto Turbo Decoder is a fast, reliable, plug-and-play immobilizer bypass device for many Fiat, Lancia, Alfa Romeo, Iveco and selected Ford models. Built for professional locksmiths, recovery services and workshops, this tool performs an automatic Immo System 2 bypass via the vehicle OBD-II port — no PC, no fuse-jumper, no complications. Simply plug it in and you can start the engine within seconds.

This device is NOT a key programmer — it does not write keys. Instead it gives immediate engine start capability while the unit remains connected and leaves the ECU in a virgin state so you can later adapt or reprogram the BCM / immobilizer module with an existing working key.

✅ Supported Vehicles (select models / ranges)

  • Fiat Panda (2012–2017) — all engines

  • Fiat 500 (2007–2017) — all engines

  • Fiat 500L (2007–2009: 1.2 & 1.4 petrol; 2010–2017: all engines)

  • Fiat Grande Punto (2008–2017) — all engines

  • Fiat Fiorino (2008–2017) — all engines

  • Fiat New Doblo (2012–2017) — all engines

  • Fiat Ducato (2010–2017) — Delphi BCM or Magneti Marelli ECU 8F2 (2.8L)

  • Fiat Abarth 500 (2008–2017)

  • Lancia Ypsilon (2012–2017) — all engines

  • Alfa Romeo MiTo (2008–2017) — all engines

  • Alfa Romeo Giulietta (2010–2017) — all engines

  • IVECO (2010–2017) — Delphi BCM modules

  • Ford KA (from 2008) — selected models

🔧 What the Device Does (Immo System 2)

  • Identifies vehicle control unit via OBD-II.

  • Resets ECU EEPROM to “virgin” state via OBD-II (no PC).

  • Emulates immobilizer code in the ECU so the engine will start while the device is connected.

All operations are automatic — the full sequence typically completes in 3–10 seconds. Once plugged in the car will start; after you remove the bypass the car will not start until the ECU/BCM is adapted properly (using a real key or programming procedure).

⚙️ Easy Plug-and-Play Procedure

  1. Ensure vehicle battery has sufficient charge.

  2. Plug the FIAT FULL IMMO BYPASS 2020 into the vehicle OBD-II port.

  3. Wait for the device status LED to indicate completion (usually a few seconds).

  4. Start the engine — the vehicle will run while the device remains connected.

  5. To restore normal operation, use your workshop procedures to adapt the BCM/Immo box with an existing working key (ECU stays in virgin state).

⚠️ Important Notes & Warnings

  • This device does NOT program keys. It only bypasses immobilizer to enable engine start while connected.

  • For lawful, authorized use only — locksmiths, recovery services, fleet operators, and authorized technicians.

  • Always confirm model/year/ECU compatibility before use. Some variants or updates may not be supported.

  • Do not drive with the device connected longer than needed; follow local safety and legal rules.

  • Battery must be stable during the operation. We recommend a charged battery or mains power.

  • Back up ECU data where possible before advanced operations.

📦 What’s Included

  • FIAT FULL IMMO BYPASS 2020 device

  • OBD-II connector cable

  • Quick start guide

  • Protective storage pouch

  • Worldwide shipping options available

FIAT FULL IMMO BYPASS 2020 DEVICEFIAT FULL IMMO BYPASS 2020 DEVICE
$1,099.00
- +