Buy CryptoGrabber MRS For Mercedes 2010-2025
CryptoGrabber MRS—MB_Remote Control_Scanner (MB_RCS)
Mercedes Keyless-GO Scanner & Remote Emulator (2010–2025)
Professional turbo decoder tool (Auto Turbo Decoder)
The CryptoGrabber MRS (MB_RCS) is a field-proven keyless-GO scanner and remote emulator built for authorized technicians, recovery services, and workshop pros working on Mercedes vehicles (model years 2010–2025). The unit scans and stores Keyless-GO radio exchanges, reproduces the required codes, and issues lock/unlock commands so you can disarm/open and arm/close the vehicle without the original remote in hand.
This compact, rugged device supports both common key radio bands—433 MHz (EU) and 315 MHz (US)—and is engineered to work with Mercedes FBS3 and FBS4 keyless systems (see compatibility notes below).
Key Benefits & Capabilities
-
Scans and stores up to 10 code events (configured as 5 Open + 5 Close).
-
Supports Keyless-GO operation on Mercedes vehicles (2010–2025).
-
Works as a remote control emulator on FBS4 systems (acts like the OEM remote).
-
Supports FBS3 Keyless-GO but requires a handle touch to capture / trigger the vehicle.
-
Dual-band support: 433 MHz (Europe) and 315 MHz (America).
-
Fast capture → reproduce workflow for emergency access, diagnostics, and authorized service tasks.
-
Compact, field-ready hardware with simple controls and clear status indicators.
How it Works
-
Scan—place the CryptoGrabber MRS near the vehicle/key and use the scan routine to capture keyless radio exchanges during normal user authorization (handle press + key transmission).
-
Store—the unit saves the captured events in memory cells (up to 10 events: 5 open, 5 close).
-
Emulate—replay the stored events to the car to perform unlock/lock commands or allow start (depending on vehicle security profile).
-
Repeat—if the original key is subsequently used, the stored codes become invalid and a new scan is required.
Compatibility & Limitations
-
Supported: Mercedes vehicles with Keyless-GO systems (2010–2025) using 433 MHz / 315 MHz.
-
FBS4: device acts as a functional remote (remote-control emulation).
-
FBS3: Works only with Keyless-GO flows; a handle touch may be required to complete capture.
-
Does NOT work with: Mercedes-Benz W223 platform (explicitly unsupported).
-
Important: If the car is opened/operated using the original key after a capture, stored codes will likely be rejected by the vehicle—you must perform a fresh scan.
Always verify compatibility by VIN and system type before use. Vehicle variants, regional firmware, aftermarket changes, or dealer updates may affect behavior.
Delivery
-
Full prepayment required.
-
Estimated lead time: 14 days from payment confirmation. (Shipping & customs times may vary by destination.)
Professional Use & Legal Notice
CryptoGrabber MRS is intended strictly for authorized, lawful use by licensed locksmiths, fleet operators, recovery services, or government/official agencies. Misuse—including unauthorized access to vehicles or private property—is illegal and punishable and the sole responsibility of the buyer.
Package & Support
-
CryptoGrabber MRS unit (MB_RCS)
-
USB charging cable & basic adaptor set
-
Quick start guide & capture/emulation workflow sheet
-
Activation & firmware update procedure (for authorized customers)
-
Technical support and compatibility assistance (VIN verification recommended)
Quick Specification Summary
-
Frequency: 433 MHz / 315 MHz
-
Memory: 10 code events (5 Open / 5 Close)
-
Systems: FBS3 (Keyless-GO), FBS4 (remote emulation)
-
Years: 2010–2025 (vehicle-dependent)
-
Unsupported: W223 platform
