Buy Nissan Key-Prog v9.1

Buy Nissan Key-Prog v9.1—Advanced Standalone Key Programming Tool for Nissan & Infiniti (2005–2022)

This is one of the most powerful and versatile standalone key programming devices, designed for Nissan and Infiniti vehicles from 2005 to 2019, including full support for the 2021 Nissan LEAF. Built to handle multiple immobilizer technologies, this all-in-one tool works seamlessly with Regular Key, Intelligent Key, Smart Key, Smart Key 2, Smart Key 3, and updated 2022 key systems.

Unlike many programmers, the Nissan Key-Prog v9.1 requires no computers, no PIN codes, and no diagnostic software—simply switch to the correct mode and program new keys with fast, reliable, step-by-step procedures.

Please note:
This device does not support Nissan models manufactured in Renault plants, including Micra, Note, and Tiida.

---

Why Professionals Choose Nissan Key-Prog v9.1

• Supports six different immobilizer systems

• Works with Nissan & Infiniti vehicles up to 2022

• Fast key registration with clear beep indicators

• Supports new-generation push-start & keyless systems

• Fully standalone—no laptop required

• Designed for locksmiths, workshops, and automotive technicians

• Supports programming additional keys within 5 seconds

• Includes a self-diagnostic mode to detect switch problems

---

Step-by-Step Operating Procedures

Each immobilizer system has its own simple process and switch configuration.

---

1. Regular Key System (2005–2014)

✔ Switch position for petrol: 1 – ON
✔ Switch position for diesel: 6 – ON

Procedure:

1. Insert key → turn ignition ON

2. Connect device to OBD2 → green LED ON

3. After 5 seconds → 3 short beeps

4. Turn ignition OFF → ON twice → key light flashes ×5

5. Turn ignition OFF
   Add extra key: Insert the next key within 5 seconds and repeat steps 3–5.

---

2. Intelligent Key System (Knob Switch – 2006–2014)

✔ Petrol models: 2 – ON
✔ Diesel models: 7 – ON
✔ X-Trail 2.5: 5 – ON

Procedure:

1. Insert the key into the electronic lock and push

2. Connect device → green LED + 1 beep → steering unlocks

3. Turn ignition ON → 3 beeps

4. Turn ignition OFF → ON twice → dash key light flashes ×5

5. Turn OFF ignition → engine starts normally

Additional key fob: Repeat within 5 seconds.

---

Activation/Erasing Intelligent Key Fobs

Erase mode: Switch 4 – ON

• Turn ignition ON → plug device → 3 beeps → all fobs erased

Record new fobs: Switch 3 – ON

• Turn ignition ON → plug device → 1 beep

• Press any button on fob → 3 confirmation beeps

Repeat for each key within 5 seconds.

---

3. Smart Key System (Start Button + Key Slot, 2007–2014)

✔ Switch position: 5 – ON

Procedure:

1. Insert key in slot → press brake or Start button

2. Plug device → steering unlocks + 1 beep

3. Press Start → ignition ON → 1 long + 3 beeps

4. Turn ignition OFF → ON twice → dash blinks ×5

5. Turn ignition OFF → engine ready
   Add extra key: Insert within 5 seconds and repeat steps 3–5.

---

4. Smart Key 2 System (Start Button, No Slot, 2010–2014)

✔ Switch position: 5 – ON

Procedure:

1. Open the door or press brake

2. Connect device → 1 beep → steering unlocks

3. Bring key to Start button → press → ignition ON → 3 beeps

4. Remove device → turn ignition OFF

5. Bring key to Start → ON → OFF

6. Press “Unlock” on the key
   Repeat for each key.

---

5. Smart Key 3 System (2014–2018)

✔ TYPE-1: 8 – ON
✔ TYPE-2: 9 – ON

Procedure:

1. Open the door or press brake

2. Plug device → after 10 sec → 3 beeps

3. Bring key to Start → press → dash flashes ×5

4. Turn ignition OFF

5. Repeat for additional keys within 5 sec

6. Finalize: turn ignition ON → OFF with the last key

---

6. New Updated Key System (2014–2022)

✔ TYPE-1: 8 – ON
✔ TYPE-2: 9 – ON

Procedure:

1. Insert key → ignition ON

2. Connect device → green LED

3. After 10 sec → 3 beeps → dash flashes ×5

4. Turn ignition OFF

5. Insert next key → turn ignition ON → dash flashes ×5

6. Turn ignition OFF

7. Finalize by cycling ignition with the last key

---

Error Signals

• 1 beep: No connection

• 2 beeps: Programming error (disconnect battery terminal)

• 3 beeps: Programming successful

• 6 beeps: Wrong switch combination or switch is faulty

---

Self-Test Mode

Set all switches to ON and apply power:

• Green/red alternating blink: Device OK

• Six consecutive beeps: Switch or hardware issue

---

Important Handling Warning

Switches are delicate—move them forward/backward only.
Never press down or push inward to avoid damage.

---

Instruction Manual

Download PDF (ENG | RUS)