Buy Renault key device V9
Renault Key Device V9 – Advanced Key & Card Programming Tool for Locksmiths and Auto Services
The Renault Key Device V9 is a powerful, professional-grade solution designed for locksmith workshops, automotive service centers, and dealership support teams. Built for speed, reliability, and ease of use, this device enables you to add new blank keys or key cards to Renault vehicles within seconds—typically between 20 and 60 seconds—without requiring a PIN code or a computer. With full OBDII functionality and support for a wide range of Renault, Dacia, Opel, Samsung, Nissan, and Fiat models, the Renault Key Device V9 is one of the most versatile tools available for key learning operations.
Whether you are adding spare keys, replacing lost keys, or preparing virgin cards for modern Renault systems, this device guarantees fast, safe, and efficient performance backed by straightforward visual LED indications and DIP-switch customization.
Professional Features of the Renault Key Device V9
✔ Program Up to 4 Keys/Cards
Configure the number of keys/cards to program (1–4) using DIP switches 1–4.
Switches 9 and 10 must always remain ON (internal test functionality).
✔ Works Directly via OBDII
No PC, PIN code, or complex diagnostic tools required.
✔ Ultra-Fast Learning Procedure
Key/card programming typically completes within 20–60 seconds, depending on the model.
✔ Supports Key-Loss Situations
Even if the vehicle owner has lost all keys/cards, the device can still perform programming.
✔ Clear LED Feedback
The device uses red/green LED signals to guide you through each step of the learning process.
How to Use the Renault Key Device V9
General Key/Card Programming Procedure (Most Renault Models)
-
Set DIP Switches
Choose the number of keys/cards to program (via switches 1–4).
Switches 9 and 10 = ALWAYS ON. -
With Ignition OFF, insert the device into the OBDII socket.
The LED will briefly turn green, then begin fast blinking, indicating the device is working. -
For Renault Megane III, Laguna III, Scenic III, Fluence, Samsung SM3
Insert virgin card into ignition.
When the LED turns off, do not remove the card until instructed. -
After 2–3 seconds, LED becomes solid green for 10 seconds.
Insert the next key/card (if any). -
When LED turns OFF, remove the current key/card.
Repeat steps for each additional card. -
When the process completes successfully, LED will blink slowly in green.
-
If the procedure fails, LED will blink red, indicating rejection by the vehicle.
Special Procedure – Megane IV, Espace V, Talisman, Scenic IV
-
Set DIP switches based on number of cards.
-
Insert device into OBDII with ignition OFF.
If adding a new card, place it on the antenna. -
When long buzzer tone sounds, place card onto the START button.
-
Repeat for each additional card.
-
Short intermittent beeps indicate completion.
-
Red LED = process rejected.
Special Procedure – Clio IV 2015+, Megane III 2015+, Megane IV, Talisman, Espace V, Scenic IV 2018+
-
Set DIP switches for quantity needed.
-
Insert device into OBDII.
Insert card in slot if applicable; otherwise keep card inside vehicle. -
When device makes two short beeps, place card on programmer.
-
When a long beep sounds, move card to ignition/start button.
-
Repeat for additional cards.
-
Green slow blink = success
Red blink = error
Supported Vehicle Models
The Renault Key Device V9 supports one of the widest compatibility lists in the industry, including:
Renault
Clio II/III/IV, Clio Campus, Modus, Scenic II/III/IV, Laguna II/III, Megane II/III/IV, Talisman, Espace IV/V, Koleos, Trafic II/III, Twingo II/III, Master II/III, Captur, Fluence, Kangoo, Wind, Safrane, Valsatis, and more.
Dacia
Duster, Logan, Logan II, Sandero I/II, Lodgy, Solenza, Dokker.
Opel
Movano Ph2/Ph3/B, Vivaro Ph1/Ph2/2014+.
Nissan
Platina, Primestar, others.
Renault-Samsung
QM3, QM5, SM3 (2006–2011+), SM5.
Fiat
Talento 2017+
(Complete list maintained as in original text.)
